Technology

Important things to Consider While Installing Cat5e Cables

Having a reliable internet connection is a necessity today. One of the best ways to fulfill that necessity is to use a good quality Cat5e Cable. But not everyone knows how to get one and more importantly, how to install bulk cat5e cables?

In this article, we will explain everything you need to know about the enhanced category 5 cable. What it is; how to choose the right one; and more importantly, how to install it?

What is a Cat5e ethernet cable?

This cable is an improved version of the conventional Category 5 cable. As a twisted pair cable, it is used widely in the home and small-scale business networks.

These cables are used to connect computers and also to connect the computer to a network hub or a switch. They can also be used to connect Internet-enabled devices like a router or a wireless access point.

These cables are easy to install and can be used in both indoor and outdoor settings.

Cat5e cable Features

The data transfer rate of these cables is up to 100 Mbps over a length of 100 meters. But you can enhance the speed up to 1 Gbps if you run it at no more than 50 meters.

The bandwidth capacity of this cable is not too impressive, as compared to other cables such as cat6 and 6a but the 350 MHz bandwidth is enough to support high-performance ethernet applications.

It features 4 twisted pairs of conductor wires at the core, which have a gauge size of 24 AWG.

The outermost part of the cable; the cable jacket, comes in three different types. Namely, plenum, riser, and PVC. Each type of jacket has a specific purpose.

These were the highlights of the cable, now let’s get into the things that you should look for before you buy these cables.

cat5e-cables

Things to consider when buying Cat5e Cables

1000ft Plenum Cat5e Cables have been used to provide high-speed internet connections to different users over a long period, and they have been used as well to connect different networks.

The cables are standardized as part of the EIA/TIA 568A and 568B specifications. And before buying, you need to make sure that you are getting the cables that are recognized by the aforementioned institution. It is important because it not only determines the performance of the cable but also its security features.

Secondly, you need to determine your requirements. Like, do you need the cable for indoor plenum spaces or riser spaces? Or perhaps you will be installing it outdoors. So, make a plan of which cable you will be needing and how much. Then you can purchase with confidence.

It is commonly used in networking, telephones, and even consumer electronics. If you are installing a new enhanced 5th category cable, you must know how to do it correctly. So, let’s get into how to install the cable?

Top Tips for Installing Cat5e Cables

You have the cables and accessories ready to be installed at the site. You have got RJ45 jacks, cable connectors, and everything you need. And what you need now is the instructions. And an idea of where to start.

The following tips will help you get an idea of where you should start the installation process.

1. Make a plan: You have probably made a plan before buying the cable. But now is the time to make the master plan. On a piece of paper or your computer, sketch the design of the network you are trying to establish. As you do that, the spaces in the building are consistent with your plan. For example, you might be thinking about running a cable in a certain place but what if it is inconsistent with your idea.

2. Measure the cables precisely: You need to make sure that the cables are not too long or short. As we say in networking, measure twice cut once. If you miscalculate the lengths, you will not be satisfied with your installation. so, make sure you got the right lengths and cut at a foot or two longer for longer run lengths.

3. Handly the cables neatly: After you have cut the cables, it is time to get started with the cable run. And as you do, be sure to avoid kinking the cable and twisting it too much. It can affect performance. Preferably, use specific tools to pull the cable to prevent damage to the cable.

4. Bundle appropriately: do not bundle too many cables. Because too many cables mean too much EMI and crosstalk. And use velcro ties to tie the cables at an appropriate strength.

5. Avoid using ethernet couplers: while these tiny devices may be handy to extend the length of ethernet cables, they are pretty mean when it comes to maintenance and reliability. They will become just another piece in your network that requires attention for maintenance.

Conclusion

When it comes to installing cat5e cables, the rules and precautions are the same for installing other ethernet cables. That means, you are now not only capable of installing enhanced category 5 cables but also other twisted-pair network cables.

Leave a Reply

Your email address will not be published. Required fields are marked *

buy windows 11 pro test ediyorum